CHARLOTTESVILLE, Va., April 04, 2018 (GLOBE NEWSWIRE) — Industry analyst firm, SmarTech Publishing has issued its latest metal additive manufacturing market research report, “Additive Manufacturing with Metal Powders 2018.” The
The additive manufacturing industry is still growing at a rapid pace, and what’s especially expanding is metal. In 2016, an estimated 983 metal additive manufacturing systems were sold. In 2017,
Elementum 3D, a metal additive manufacturing materials and parameters development company, is thrilled to announce we were awarded a Phase II SBIR grant of $750,000 from the National Science Foundation
3D printing has given people a whole new way of manufacturing and designing things, including folks in the automotive industry. Bugatti, for example, is looking to 3D print brake calipers.
3D printed metal parts could soon power the Finnish Air Force. Patria Plc, a chief provider of aerospace and defence solutions for the Finnish government and Kongsberg Defense & Aerospace,
A Colorado alliance has found the link between AM and AI. Using machine learning to map the formula for successful metal 3D printing, researchers aim to know the right parameters
During the 400-second test at NASA’s Stennis Space Center, Aerojet Rocketdyne was able to evaluate the performance of a 3-D printed vibration dampening device, known as a pogo accumulator assembly,
A Transparency Market Research report, the market valuation for global metal powders for AM will rise substantially to become US$1,783.9 mn by 2025-end. According to a Transparency Market Research report,
With outstanding innovations that are sure to amaze many attendees, the winners of the formnext Start-up Challenge 2017 are set to reveal future directions the additive manufacturing sector could take. AIM3D, AM Technologies, Authentise, Elementum 3D, and Identify3D are
ENGINEERING.com speaks to Elementum 3D about the company’s unique metal powder composites for metal additive manufacturing. Market research firm IDTechEx predicts that the global market for 3D printing metals will
The co-founder of a materials-development firm seeks to aid manufacturers in pursuing the material freedom of AM.#metal #composites According to Jacob Nuechterlein, co-founder and solutions developer for Elementum 3D, the aluminum alloy
Lawrence Livermore National Laboratory delivers amazing research, often related to 3D printing, on a regular basis, so it’s never surprising when they announce something big. This week, however, LLNL researchers have made
The Colorado Economic Development Commission (EDC) approved $2.9 million in Advanced Industries Accelerator (AIA) grants for 18 Colorado companies with technologies that will positively impact key industries from health to
Valentin Stamate, a researcher at the Transilvania University of Brașov, Romania, has demonstrated a prototype two-stroke engine, 3D printed in 3 different metals. Stamate believes the 3D printed engine to be the
Erie, CO-based metal materials development startup comes out on top of a field of 10 aerospace competitors.Denver, CO – Elementum 3D, an advanced additive manufacturing (AM) materials research and development
Germany-based laser systems companies dominate; annual market tipped to surpass $6 million by the mid-2020s. Audi’s SLM equipment The primary market for metal additive manufacturing (AM) systems and metal powder materials
Californian company Aerojet Rocketdyne has announced successful hot-fire testing of its 3D printed thrust chamber for the RL-10 rocket engine. The component was 3D printed in copper using selective laser melting (SLM)
The last-surviving 1914 Delage Type-S has been resurrected with 3D printing. The 103 year-old car, currently in Australia, has laid dormant for three years since its engine block cracked in 2014. With
Danish bike company CeramicSpeed has just gone public with its newest luxury bike part. Created in collaboration with custom frame builder Mosaic Cycles and high-end wheel manufacturer ENVE, CeramicSpeed’s new
The race to produce small-series parts on demand, on location, will determine the shape of a $400 billion market. Roughly half the use of 3D printing is now for prototyping,
Deutsche Bahn (DB), a German railway company that generates yearly revenue of almost 40 billion euros, used the Additive Manufacturing Forum Berlin 2017 to encourage suppliers to adopt additive manufacturing
The largest manufacturing and electronics company in Europe, Siemens announces it has 3D printed a replacement part for a nuclear power plant in Slovenia. The part was produced for the Krško nuclear power
WASHINGTON — Satellite manufacturers are turning increasingly to additive manufacturing to reduce the cost and time required to design and build spacecraft. Space Systems Loral announced March 7 that its
Researchers at the U.S. Army Armament Research, Development and Engineering Center have test fired a 3D printed grenade launcher called RAMBO (Rapid Additively Manufactured Ballistics Ordnance). Donald Trump’s first budget
What do you do when you need a replacement part for one of the rarest cars in the world? Just 3D print it out of metal. The technology of 3d
Ferrari is looking towards 3D printing technology in a bid to introduce an innovative piston design that could deliver a big step forward for its 2017 Formula 1 engine. While
FRANKFURT (Reuters) – U.S. conglomerate General Electric GE.N has agreed to buy privately held German 3D printing firm Concept Laser for 549 million euros ($599 million), it said on Thursday, after its
If the gold rush, the green rush, fourteeners galore, and epic skiing, hiking, camping, and fishing had not already put the rugged state of Colorado on the map long ago,
Has 3D printing (3DP) finally come of age? It’s become clear that the technology, also known as additive manufacturing, is crossing from a period of hype and experimentation into one
The National Aeronautics and Space Administration has turned to 3D printing once again to make science fiction into fact with a Methane-powered rocket turbo pump that rewrites all of the
Materials science and metallurgy experts helping you redefine what’s possible.
Copyright © 2024 Elementum – All rights reserved
Patrick Callard earned a B.B.A. in advertising from Western Michigan University in 1990. He provides over 30 years of experience in marketing communications, new business development and market outreach.
He has managed multiple marketing projects and budgets for a variety of services and products.
Patrick also successfully grew an IT consulting business from a two-man basement business to a profitable eight employee business in 4-years. Patrick’s daily focus is to unify customer experience, brand purpose, creative communication, and marketing technology to drive the growth of the business.
Tyler’s message will key on blown powder Directed Energy Deposition (L-DED) for AM and repair and why this process is being realized by industry as one of the key pillars in printing thin wall part structures and large part envelope requirements.
Shawn will reveal how Lithography-based Ceramic Manufacturing (LCM) is producing high resolution, high performance technical ceramics that can serve a wide range of applications and structural materials, such as alumina, zirconia, and silicon nitride. He will also touch on how LCM has progressed into multi-material components incorporating ceramics and metals.
Jeff’s presentation will focus on the advances in wire DED, including welding processes for wire DED (arc, laser, and e-beam), next-generation alloys for large format metal 3D printing, and use cases that can benefit from replacing large forgings, replacing large machined billets, and producing advanced tooling — enabling next generation designs.
Dr. Jacob Nuechterlein is the founder and president of Elementum 3D in Erie, CO. He earned his Bachelor of Engineering, Master of Science, and Doctor of Philosophy at the Colorado School of Mines. Jacob has been researching, teaching, or consulting on topics such as casting and powder metallurgy for the last 14 years. Elementum 3D’s work with powder bed laser additive manufacturing is based on these principles. In addition, is thesis work in thermodynamics and formation kinetics of metal matrix composites is directly related to all 3D printing processes.