December 2022
Wrapping up 2022 with two in-depth video podcasts Video Podcast #1 AM Voices chats with our Founder and President of Elementum3D, Dr Jacob Nuechterlein and Director of Business Development,
Wrapping up 2022 with two in-depth video podcasts Video Podcast #1 AM Voices chats with our Founder and President of Elementum3D, Dr Jacob Nuechterlein and Director of Business Development,
PRESS RELEASE Elementum 3D enters material development agreement with SLM Solutions Lübeck, Germany – November 29th, 2022. Metal-based additive manufacturing requires a need for collaboration between hardware OEMs and
Elementum 3D joins NASA and 3D Systems in AM Copper webinar – Register Now! We invite our readers to attend Deep-Tech Showcase’s “Pushing the Limits of Copper in Additive Manufacturing”
REM Surface Engineering – The surface finish experts REM Surface Engineering and Elementum 3D first crossed paths at Rapid+TCT in 2018. Justin Michaud, President and CEO of REM, attended a
Army & Navy STTR Phase I projects kick-off Elementum 3D recently began work on an Army STTR project that partners with Georgia Tech and Addiguru to improve the reliability of
Corporate culture grows in the mud On July 24, Elementum 3D employees teamed up to test their limits physically and mentally at the “Tough Mudder” event located in Byers, Colorado.
New fatigue report proves A7050-RAM2 outperforms 7050 wrought Elementum 3D’s A7050-RAM2 aluminum alloy, developed specifically for additive manufacturing, recently completed room temperature fatigue testing, and is shown below together with
High-performance metal 3D printing alloys take hold at Rapid+TCT For Elementum 3D, this year’s Rapid+TCT event marked a transition from needing to educate the industry about our patented reactive additive
Elementum 3D secures DARPA funding to develop printing process for rhenium metal Elementum 3D has been awarded a Direct to Phase II SBIR contract from DARPA to develop a robust,
SAVE THE DATE: 3D Printing + Aluminum Webinar Register Now Elementum 3D invites you to attend its one-hour co-hosted “Bridging the Gap” webinar on Wednesday, April 27, at 11am (EDT).
Elementum 3D materials under the microscope The impact and advantages of Elementum 3D’s investment in a state-of-the-art Scanning Electron Microscope (SEM) are already paying dividends to our customers. The Phenom
A6061-RAM2 and GRCop-42 processes expanded to new AM systems A6061-RAM2 printing material parameters are being developed for 3D Systems’ DMP Flex 350 platform. Their Application Innovation Group is supporting customers like NASA
Materials science and metallurgy experts helping you redefine what’s possible.
Copyright © 2024 Elementum – All rights reserved
Patrick Callard earned a B.B.A. in advertising from Western Michigan University in 1990. He provides over 30 years of experience in marketing communications, new business development and market outreach.
He has managed multiple marketing projects and budgets for a variety of services and products.
Patrick also successfully grew an IT consulting business from a two-man basement business to a profitable eight employee business in 4-years. Patrick’s daily focus is to unify customer experience, brand purpose, creative communication, and marketing technology to drive the growth of the business.
Tyler’s message will key on blown powder Directed Energy Deposition (L-DED) for AM and repair and why this process is being realized by industry as one of the key pillars in printing thin wall part structures and large part envelope requirements.
Shawn will reveal how Lithography-based Ceramic Manufacturing (LCM) is producing high resolution, high performance technical ceramics that can serve a wide range of applications and structural materials, such as alumina, zirconia, and silicon nitride. He will also touch on how LCM has progressed into multi-material components incorporating ceramics and metals.
Jeff’s presentation will focus on the advances in wire DED, including welding processes for wire DED (arc, laser, and e-beam), next-generation alloys for large format metal 3D printing, and use cases that can benefit from replacing large forgings, replacing large machined billets, and producing advanced tooling — enabling next generation designs.
Dr. Jacob Nuechterlein is the founder and president of Elementum 3D in Erie, CO. He earned his Bachelor of Engineering, Master of Science, and Doctor of Philosophy at the Colorado School of Mines. Jacob has been researching, teaching, or consulting on topics such as casting and powder metallurgy for the last 14 years. Elementum 3D’s work with powder bed laser additive manufacturing is based on these principles. In addition, is thesis work in thermodynamics and formation kinetics of metal matrix composites is directly related to all 3D printing processes.